Water Check 10-in-1 Drinking Water Test Strips

Water Check 10-in-1 Drinking Water Test Strips (50 strips)

A quick home check for rainwater tanks, bores and town water, with results in about 30 seconds. Dip a strip for 2 seconds, wait 30 seconds, then compare the pads against the colour chart on the bottle.

Why 50 strips? That’s enough for regular checks without a drawer full of strips that expire or go damp before you use them.

Chosen for Australian water. We’ve picked test pads with ranges that sit as close to the Australian Drinking Water Guidelines (ADWG) limits as strip technology allows, so the results are useful for drinking water.

What it tests, and the chart range:

• pH: 6.0 – 9.0

• Total alkalinity: 0 – 360 mg/L

• Hardness: 0 – 425 mg/L

• Copper: 0 – 100 mg/L

• Lead: 0 – 50 ppb

• Iron: 0 – 100 mg/L

• Mercury: 0 – 25 mg/L

• Manganese: 0 – 50 mg/L

• Total chlorine: 0 – 10 mg/L

• Free chlorine: 0 – 10 mg/L

Not sure what your results mean? Our free Understanding your results guide explains each reading against the ADWG and what to do next.

For home screening only. Results are indicative and don’t replace laboratory analysis. Some guideline values sit below the lowest reading on the chart, so a zero result for a metal may not confirm your water meets the guideline. If you get an unexpected result, confirm it with a NATA-accredited laboratory.